Hello, Ive worked on 2 of these in 2 weeks! This one wont go back in
the toilet . It tries! Also, the pulse in Hankey test only goes to 60.
The one I worked on a couple weeks back I was able to set to 90 to get
it to work . Any help or advice is appreciated. Thanks! JR

On Apr 24, 5:35*pm, Pinball Plus <pinballp...@gmail.com> wrote:
> Hello, Ive worked on 2 of these in 2 weeks! This one wont go back in
> the toilet . It tries! Also, the pulse in Hankey test only goes to 60.
> The one I worked on a couple weeks back I was able to set to 90 to get
> it to work . Any help or advice is appreciated. *Thanks! JR

Is it that Mr. Hankey goes down, but doesn't stay down? I had that
problem on mine a few years back. Needed to take the mechanism out
and bend the metal latch back in place as it had been worn out of
position over time. Took all of 15 minutes.

If it's just sluggish, I would pull the mech out and give everything a
good cleaning. If someone went in there and greased it up at one time
it might be binding up.

Scott

On Apr 24, 5:35*pm, Pinball Plus <pinballp...@gmail.com> wrote:
> Hello, Ive worked on 2 of these in 2 weeks!

Well no wonder it won't go down... try more frequent trips! I
suggest some Liquid Plumr and a big plunger!