Tech: Capacitor Value C20 on AS-2518-22 Solenoid Driver Board - Games Forum - Playstation 3 & Xbox 360 Games Discussion

#1 11-13-2007

Thanks!

#2 11-13-2007

On Nov 13, 5:05 pm, Chrispy <pindro...@embarqmail.com> wrote:
> Thanks!

I looked on one of my boards (a broken one that was easy to get at)
and it's a 11,000 UFD 25Volt. This was NOT the original as it is a
radial type, not the Axial.

It seems to me that the originals were 10000 or 12000? Either would
work (if that's the case).

Chris

#3 11-13-2007

On Nov 13, 5:05 pm, Chrispy <pindro...@embarqmail.com> wrote:
> Thanks!

According to the manual, C11-C21 are .002 MFD 1000 volt.

Good luck!
Chris

#4 11-13-2007

.002uF (2000pF) 1kV ceramic disk

steve
---
Steve Kulpa (cargpb10)
Hermitage, TN
http://www.geocities.com/stevekulpa/faces/rgpidx.htm - Faces
http://www.geocities.com/stevekulpa/pinball.htm - Pinball

#5 11-13-2007

I have plenty of used ones off junked boards - if you need a few,
shoot me your snail-mail.

steve

---
Steve Kulpa (cargpb10)
Hermitage, TN
http://www.geocities.com/stevekulpa/faces/rgpidx.htm - Faces
http://www.geocities.com/stevekulpa/pinball.htm - Pinball