Games Forum - Playstation 3 & Xbox 360 Games Discussion
Go Back   Games Forum - Playstation 3 & Xbox 360 Games Discussion > Game topics > Popular Computer Games > Quake > Quake 3
Reload this Page quake 3 and nvidia firewall
Forgotten Your Password?
Reply
 
Thread Tools Display Modes
  #1  
Old 01-18-2007
don
Guest
 
Posts: n/a
quake 3 and nvidia firewall

If I to an online game I freeze up everytime within seconds of joining the
game. On every freeze up there is a punkbuster message displayed. I have
given q3 permission to access the internet. If I turn off the nvidia
firewall all is well and I can connect and play. Do I need to open up a
port for PB, or is it just a problem between q3 and the nvidia firewall?
Or am I just waaay to numb?



Reply With Quote
  #2  
Old 01-18-2007
sittingduck
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall

don wrote:

> If I to an online game I freeze up everytime within seconds of joining the
> game. On every freeze up there is a punkbuster message displayed. I have
> given q3 permission to access the internet. If I turn off the nvidia
> firewall all is well and I can connect and play. Do I need to open up a
> port for PB, or is it just a problem between q3 and the nvidia firewall?
> Or am I just waaay to numb?


What is the punkbuster message.
Have you updated punkbuster lately?
http://www.evenbalance.com/index.php?page=updatepb.php

http://www.evenbalance.com/index.php?page=updatepb.php
Reply With Quote
  #3  
Old 01-18-2007
don
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall

sittingduck <spam.no.sitting-duck@spamgourmet.com> wrote in
news:Xns968ED091DD0D0duckrulestheuniverse@news.eas ynews.com:

> don wrote:
>
>> If I to an online game I freeze up everytime within seconds of
>> joining the game. On every freeze up there is a punkbuster message
>> displayed. I have given q3 permission to access the internet. If I
>> turn off the nvidia firewall all is well and I can connect and play.
>> Do I need to open up a port for PB, or is it just a problem between
>> q3 and the nvidia firewall? Or am I just waaay to numb?

>
> What is the punkbuster message.
> Have you updated punkbuster lately?
> http://www.evenbalance.com/index.php?page=updatepb.php
>
> http://www.evenbalance.com/index.php?page=updatepb.php
>


I have updated PB. The message is (at least the last one)...

pb client: ogc_trans="":must be equal to 0 (ok)
:0 current cvar violations
:cvarlist truncated: use pb_cvarlist to see entire
list

i don't think it's the same message each time, although this is the only
one i wrote down. it appears to me that i lock as soon as pb tries to
connect to wherever it connects. firewall off no problem.
Reply With Quote
  #4  
Old 01-18-2007
number5ive@no.no.na.net
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall


>don wrote:
>
>> If I to an online game I freeze up everytime within seconds of joining the
>> game. On every freeze up there is a punkbuster message displayed. I have
>> given q3 permission to access the internet. If I turn off the nvidia
>> firewall all is well and I can connect and play. Do I need to open up a
>> port for PB, or is it just a problem between q3 and the nvidia firewall?
>> Or am I just waaay to numb?

//////////////////////////
Swag:
http://www.evenbalance.com/index.php?page=faq-q3.php

Do I have to re-configure my firewall or proxy to use PunkBuster?

In general, if a connection can play the Game online successfully
without PunkBuster, then there will be no need to make any
changes to a firewall or proxy that may be in use when PunkBuster
is Installed and Enabled.
PunkBuster communicates over the Internet (and in LAN
environments) using the same network channels created and used by
the Game, and therefore requires no changes.
If, however, you had to adjust your firewall to use the game in
the first place, you may need to extend that adjustment to
include ports used by PB's auto-update feature.
PunkBuster Clients use outgoing UDP Port 24349 to get security
info from the PunkBuster Master Servers, PunkBuster Servers use
UDP Ports 24349 and 24305. "


Reply With Quote
  #5  
Old 01-18-2007
don
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall

number5ive@no.no.na.net wrote in
news:blf3d1dtre72kl47fg4bq0rpo25iv9i47t@4ax.com:
<snip>

> //////////////////////////
> Swag:
> http://www.evenbalance.com/index.php?page=faq-q3.php
>
> Do I have to re-configure my firewall or proxy to use PunkBuster?
>
> In general, if a connection can play the Game online successfully
> without PunkBuster, then there will be no need to make any
> changes to a firewall or proxy that may be in use when PunkBuster
> is Installed and Enabled.
> PunkBuster communicates over the Internet (and in LAN
> environments) using the same network channels created and used by
> the Game, and therefore requires no changes.
> If, however, you had to adjust your firewall to use the game in
> the first place, you may need to extend that adjustment to
> include ports used by PB's auto-update feature.
> PunkBuster Clients use outgoing UDP Port 24349 to get security
> info from the PunkBuster Master Servers, PunkBuster Servers use
> UDP Ports 24349 and 24305. "
>
>
>


thank you very much. this gives me SOMETHING to try. left to my own
devices i did a clean install of q3, redownloaded pr1.32, reran pbweb a
couple of times, and pulled out a large handful of hair.....i have been
doing a bit research on the nvidia firewall and think i might just lose
it and go back to zonealrm...
Reply With Quote
  #6  
Old 01-18-2007
sittingduck
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall

don wrote:

> i might just lose
> it and go back to zonealrm...


Zonealarm is the AOL of firewalls. It sux, IMO.
Check out sygate, it's free, and runs very well, very trouble-free.
Reply With Quote
  #7  
Old 01-18-2007
don
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall

sittingduck <spam.no.sitting-duck@spamgourmet.com> wrote in
news:Xns968FBFCE617DBduckrulestheuniverse@news.eas ynews.com:

> don wrote:
>
>> i might just lose
>> it and go back to zonealrm...

>
> Zonealarm is the AOL of firewalls. It sux, IMO.
> Check out sygate, it's free, and runs very well, very trouble-free.
>


I guess I should screw around with this one a bit more. I have more
problems than I thought! I am not even sure if it is the nvidia firewall, I
forgot about the one on my dsl modem/router. Things have changed mucho on
my desk since the good ole days of playing q3 for hours every day on a
machine that would barely run it. One thing for sure I WILL FIGURE IT OUT,
maybe this time I should RTFM.

thanks for your help and suggestions

Reply With Quote
  #8  
Old 01-18-2007
don
Guest
 
Posts: n/a
Re: quake 3 and nvidia firewall

number5ive@no.no.na.net wrote in
news:blf3d1dtre72kl47fg4bq0rpo25iv9i47t@4ax.com:

<snip>

> If, however, you had to adjust your firewall to use the game in
> the first place, you may need to extend that adjustment to
> include ports used by PB's auto-update feature.
> PunkBuster Clients use outgoing UDP Port 24349 to get security
> info from the PunkBuster Master Servers, PunkBuster Servers use
> UDP Ports 24349 and 24305. "


okay number5ive you solved my problem! opened up these ports and all is
well. you rule! q3 goodness is mine

thank you very very much!
Reply With Quote
Reply
Get This


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Mission Statement

GamesForum.Ca is an Online Community of gaming enthusiasts joining together in order to better themselves in the field of gaming.

Together with Gamers we strive to produce solutions to your problems, discuss various strategies and further our personal knowledge by learning from fellow players.

We strive to bring you the latest gaming news and information and everything else related to gaming.

Support Us

Gamers Auctions





Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.


© 2011 | ZoyAR, Inc | All Rights Reserved